View PEH200VZ5100MU2_8435966.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 benefts ? h igh cv value ? l ong life, up to 29,000 hours at +85oc (v r , i r applied) ? l ow esr and esl ? c ompact size ? o ptimized designs available upon request overview kemet's peh200 series of capacitors has a polarized all- welded design, heavy duty screw terminals, extended cathode construction, safety vent, and plastic insulation. the sealing system is designed for electrolyte leakage-free operation and a very low gas-diffusion rate of electrolyte. mechanical contact between the winding and aluminum case allows excellent heat transfer from the winding hot-spot to the ambient, which means cooler operation and very high current ratings. applications typical applications for kemet's peh200 capacitor include uninterruptible power supplies (ups), ground power units (gpu), welding equipment, and drives where high current ratings and compact size are important. screw terminal aluminum electrolytic capacitors peh200 series, +85c part number system peh200 h a 515 0 m u2 series rated voltage (vdc) size code capacitance code (f) version capacitance tolerance stud option screw terminal aluminum electrolytic h = 25 k = 40 m = 63 p = 100 s = 250 u = 350 x = 385 v = 400 o = 420 y = 450 z = 500 see dimension table the last two digits represent signifcant fgures. the frst digit specifes the total number of digits. 0 = standard m = 20% u2 = plain can b2 = threaded mounting stud one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 performance characteristics item performance characteristics capacitance range 100 C 330,000 f rated voltage 25 C 500 vdc operating temperature -40 to +85c capacitance tolerance 20% at 100 hz / +20c operational lifetime d (mm) rated voltage and ripple current at +85c (hours) rated voltage at +85c (hours) 35 10,000 50 12,000 65 15,000 75 19,000 90 29,000 60,000 shelf life 2,000 hours at +85c or 4 years at +40c 0 vdc leakage current i = 0.003 cv + 4000 (a) (v r < 500 vdc) c = rated capacitance (f), v = rated voltage (vdc). voltage applied for 5 minutes at +20c. vibration test specifcations procedure requirements d 50 mm 0.75 mm displacement amplitude or 10 g maximum acceleration. vibration applied for three 2-hour sessions at 10 C 500 hz (capacitor clamped by body). no leakage of electrolyte or other visible damage. deviations in capacitance and tan from initial measurements must not exceed: ? c/c < 5% d > 50 mm 0.75 mm displacement amplitude or 10 g maximum acceleration. vibration applied for three 2-hour sessions at 10 C 55 hz (capacitor clamped by body). standards iec 60384C4 long life grade 40/85/56 test method & performance endurance life test conditions performance temperature +85c test duration 2,000 hours ripple current maximum ripple current specifed in table voltage the sum of dc voltage and the peak ac voltage must not exceed the rated voltage of the capacitor performance the following specifcations will be satisfed when the capacitor is tested at +20c: capacitance change 100 v within 15% of the initial value > 100 v within 10% of the initial value equivalent series resistance does not exceed 200% of the initial value leakage current does not exceed leakage current limit screw terminal aluminum electrolytic capacitors C peh200 series, +85c
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 dimensions C millimeters l1 side view oval terminal end view d optional mounting stud (m x s) round terminal end view l2 a + dt l3 + dt b reference size (mm) size code dimensions in mm mounting stud (m x s) approximate weight grams l1 l2 l3 1.0 1.0 1.0 1.0 0.5 nominal 35 x 51 a 36.6 51.5 54.5 58.9 13.0 m8 x 12 70 35 x 60 b 36.6 59.5 62.5 66.9 13.0 m8 x 12 85 35 x 75 c 36.6 73.5 76.5 80.9 13.0 m8 x 12 105 35 x 95 d 36.6 94.5 97.5 101.9 13.0 m8 x 12 130 50 x 49 g 51.6 48.5 51.5 56.4 22.0 m12 x 16 150 50 x 75 h 51.6 74.5 77.5 82.4 22.0 m12 x 16 180 50 x 95 j 51.6 95.5 98.5 103.4 22.0 m12 x 16 240 50 x 105 k 51.6 103.5 106.5 111.4 22.0 m12 x 16 265 50 x 115 i 51.6 115.5 118.5 123.4 22.0 m12 x 16 300 65 x 105 o 66.6 106.0 109.2 113.0 28.5 m12 x 16 415 65 x 115 q 66.6 118.0 121.2 125.0 28.5 m12 x 16 460 65 x 130 s 66.6 129.0 132.2 136.0 28.5 m12 x 16 520 65 x 140 r 66.6 141.0 144.2 148.0 28.5 m12 x 16 650 75 x 78 l 76.6 77.0 80.2 84.0 32.0 m12 x 16 430 75 x 98 p 76.6 98.0 101.2 105.0 32.0 m12 x 16 530 75 x 105 t 76.6 106.0 109.2 113.0 32.0 m12 x 16 585 75 x 115 u 76.6 118.0 121.2 125.0 32.0 m12 x 16 640 75 x 145 v 76.6 146.0 149.2 153.0 32.0 m12 x 16 800 75 x 220 x 76.6 221.0 224.2 228.0 32.0 m12 x 16 1400 90 x 78 m 91.6 76.5 79.7 83.4 32.0 m12 x 16 750 90 x 98 n 91.6 97.5 100.7 104.4 32.0 m12 x 16 950 90 x 145 y 91.6 145.5 148.7 152.4 32.0 m12 x 16 1400 90 x 220 z 91.6 220.0 224.2 226.9 32.0 m12 x 16 1500 note: dimensions include sleeving. additional case sizes available on request termination table diameter thread termination style dimensions in mm dt b 35 m5 round 8 50 m5 oval 15 13 65 m5 oval 15 13 75 m5 oval 15 13 90 m5 oval 15 13 note: m6 and other termination options available on request screw terminal aluminum electrolytic capacitors C peh200 series, +85c safety vent polarity mark safety vent polarity mark (d > 36.6) (d = 36.6)
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 shelf life the capacitance, esr and impedance of a capacitor will not change signifcantly after extended storage periods, however the leakage current will very slowly increase. kemet products are particularly stable and allow a shelf life in excess of three years at 40c. see sectional specifcation under each product series for specifc data. re-age (reforming) procedure apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specifed limit. during re-aging a maximum charging current of twice the specifed leakage current or 5 ma (whichever is greater) is suggested. reliability the reliability of a component can be defned as the probability that it will perform satisfactorily under a given set of conditions for a given length of time. in practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability theory. it is also necessary to clearly defne the level of stress involved (e.g. operating voltage, ripple current, temperature and time). finally, the meaning of satisfactory performance must be defned by specifying a set of conditions which determine the end of life of the component. reliability as a function of time, r(t), is normally expressed as: r(t)=e- t where r(t) is the probability that the component will perform satisfactorily for time t, and is the failure rate. failure rate the failure rate is the number of components failing per unit time. the failure rate of most electronic components follows the characteristic pattern: ? e arly failures are removed during the manufacturing process. ? t he operational life is characterized by a constant failure rate. ? t he wear out period is characterized by a rapidly increasing failure rate. the failures in time (fit) are given with a 60% confdence level for the various type codes. by convention, fit is expressed as 1 x 10 -9 failures per hour. failure rate is also expressed as a percentage of failures per 1,000 hours. e.g., 100 fit = 1 x 10 -7 failures per hour = 0.01%/1,000 hours end of life defnition catastrophic failure: short circuit, open circuit or safety vent operation parametric failure: ? c hange in capacitance > 10% ? l eakage current > specifed limit ? e sr > 2 x initial esr value screw terminal aluminum electrolytic capacitors C peh200 series, +85c
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 mtbf the mean time between failures (mtbf) is simply the inverse of the failure rate. mtbf= 1/ the failure rate is derived from our periodic test results. the failure rate ( r ) is, therefore, only given at test temperature for life tests. an estimation is also given at 60c. the expected failure rate for this capacitor range is based on our periodic test results for capacitors with structural similarity . t a failure rate per hour 85c 1,000 fit 60c 100 fit failure rate per hour includes both catastrophic and parametric failures. environmental compliance as an environmentally conscious company, kemet is working continuously with improvements concerning the environmental effects of both our capacitors and their production. in europe (rohs directive) and in some other geographical areas like china, legislation has been put in place to prevent the use of some hazardous materials, such as lead (pb), in electronic equipment. all products in this catalog are produced to help our customers obligations to guarantee their products and fulfll these legislative requirements. the only material of concern in our products has been lead (pb), which has been removed from all designs to fulfll the requirement of containing less than 0.1% of lead in any homogeneous material. kemet will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. to clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for rohs compatible capacitors. because of customer requirements, there may appear additional markings such as lf = lead free or lfw = lead free wires on the label. screw terminal aluminum electrolytic capacitors C peh200 series, +85c wear out early failures operational life failure rate time
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 table 1 C ratings & part number reference (1) mounting code: u2 = plain can, b2 = threaded mounting stud 2 2 m/s forced air, studmounted on 3c/w aluminum chassis. vdc rated capacitance code ripple current maximum maximum l esl part number 100 hz 25c (f) d x l (mm) 100 hz 85c (a) 10 khz 50c (a) 2 10 khz 40c (a) 100 hz 20c (m) 100 khz 20c (m) approximate (nh) 25 15000 a 35 x 51 11.9 28.7 19.0 25 21 12 peh200ha5150m(1) 25 22000 c 35 x 75 15.2 34.3 24.4 17 14 12 peh200hc5220m(1) 25 33000 d 35 x 95 17.8 38.0 28.1 12 10 12 peh200hd5330m(1) 25 47000 h 50 x 75 20.2 43.3 30.1 11 10 16 peh200hh5470m(1) 25 68000 j 50 x 95 23.4 47.4 34.6 8 7 16 peh200hj5680m(1) 25 100000 k 50 x 105 23.9 46.1 34.7 7 7 16 peh200hk6100m(1) 25 150000 o 65 x 105 26.3 50.0 37.2 7 7 16 peh200ho6150m(1) 25 220000 t 75 x 105 35.0 63.6 49.5 5 5 17 peh200ht6220m(1) 25 330000 v 75 x 145 40.0 73.1 56.9 4 4 17 peh200hv6330m(1) 40 6800 a 35 x 51 9.9 27.2 18.1 33 25 12 peh200ka4680m(1) 40 10000 b 35 x 60 12.0 31.5 21.4 23 18 12 peh200kb5100m(1) 40 15000 c 35 x 75 14.6 36.1 25.5 16 12 12 peh200kc5150m(1) 40 22000 d 35 x 95 17.1 39.8 29.2 12 9 12 peh200kd5220m(1) 40 33000 h 50 x 75 18.9 41.1 28.8 11 9 16 peh200kh5330m(1) 40 47000 j 50 x 95 22.1 46.3 33.6 8 7 16 peh200kj5470m(1) 40 68000 o 65 x 105 25.2 49.9 35.6 7 7 16 peh200ko5680m(1) 40 100000 o 65 x 105 24.9 46.3 36.9 8 8 16 peh200ko6100m(1) 40 150000 u 75 x 115 35.7 67.7 51.2 5 4 17 peh200ku6150m(1) 40 220000 v 75 x 145 34.4 62.3 48.9 5 5 17 peh200kv6220m(1) 63 4700 a 35 x 51 9.0 26.8 18.0 32 21 12 peh200ma4470m(1) 63 6800 c 35 x 75 11.5 32.7 23.5 21 14 12 peh200mc4680m(1) 63 10000 d 35 x 95 13.6 36.0 27.0 15 10 12 peh200md5100m(1) 63 15000 h 50 x 75 16.1 37.3 26.5 14 11 16 peh200mh5150m(1) 63 22000 j 50 x 95 19.0 42.0 30.9 10 8 16 peh200mj5220m(1) 63 33000 o 65 x 105 22.8 45.9 34.8 10 8 16 peh200mo5330m(1) 63 47000 o 65 x 105 21.8 42.7 32.0 10 9 16 peh200mo5470m(1) 63 68000 u 75 x 115 31.5 61.3 46.8 6 5 17 peh200mu5680m(1) 63 100000 v 75 x 145 34.3 62.2 50.3 5 5 17 peh200mv6100m(1) 100 1500 a 35 x 51 5.7 18.0 12.1 92 63 12 peh200pa4150m(1) 100 2200 b 35 x 60 7.0 21.3 14.7 63 44 12 peh200pb4220m(1) 100 3300 c 35 x 75 8.7 25.0 17.8 43 30 12 peh200pc4330m(1) 100 4700 d 35 x 95 10.3 28.9 21.1 31 21 12 peh200pd4470m(1) 100 6800 h 50 x 75 12.7 30.4 21.5 33 27 16 peh200ph4680m(1) 100 10000 j 50 x 95 15.3 34.7 25.6 23 19 16 peh200pj5100m(1) 100 15000 k 50 x 105 17.3 37.6 27.9 17 14 16 peh200pk5150m(1) 100 22000 o 65 x 105 19.3 38.7 30.1 15 13 16 peh200po5220m(1) 100 33000 t 75 x 105 2 6.3 53.0 39.8 10 8 17 peh200pt5330m(1) 100 47000 v 75 x 145 30.8 60.5 47.3 7 6 17 peh200pv5470m(1) 250 330 a 35 x 51 2.2 13.5 8.7 330 170 12 peh200sa3330m(1) 250 470 b 35 x 60 2.7 15.9 10.6 240 120 12 peh200sb3470m(1) 250 680 c 35 x 75 3.4 18.7 13.0 160 84 12 peh200sc3680m(1) 250 1000 d 35 x 95 4.1 21.2 15.6 110 58 12 peh200sd4100m(1) 250 1000 g 50 x 49 4.3 20.7 12.6 120 69 16 peh200sg4100m(1) 250 1500 h 50 x 75 5.9 28.7 19.5 78 42 16 peh200sh4150m(1) 250 2200 j 50 x 95 7.3 32.5 23.2 54 29 16 peh200sj4220m(1) 250 3300 o 65 x 105 10.0 39.8 29.4 38 22 16 peh200so4330m(1) 250 3300 l 75 x 78 10.5 43.8 29.6 38 22 17 peh200sl4330m(1) 250 4700 o 65 x 105 11.3 38.2 27.2 29 18 16 peh200so4470m(1) 250 4700 m 90 x 78 12.7 44.2 30.4 30 18 16 peh200sm4470m(1) 250 6800 t 75 x 105 14.7 51.5 36.5 20 12 17 peh200st4680m(1) 250 6800 n 90 x 98 15.8 52.1 37.3 21 13 16 peh200sn4680m(1) 250 10000 v 75 x 145 18.0 59.0 44.0 14 9 17 peh200sv5100m(1) 250 12000 v 75 x 145 18.8 58.6 43.6 14 9 17 peh200sv512am(1) 250 15000 x 75 x 220 20.6 61.6 49.2 10 6 17 peh200sx5150m(1) 250 15000 y 90 x 145 21.8 60.1 45.5 12 8 16 peh200sy5150m(1) 350 220 a 35 x 51 2.0 13.7 8.8 360 170 12 peh200ua3220m(1) 350 330 b 35 x 60 2.6 16.6 11.0 240 110 12 peh200ub3330m(1) 350 470 c 35 x 75 3.2 19.3 13.4 170 79 12 peh200uc3470m(1) vdc rated capacitance size code reference size ripple current esr l esl part number screw terminal aluminum electrolytic capacitors C peh200 series, +85c
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 table 1 C ratings & part number reference cont'd (1) mounting code: u2 = plain can, b2 = threaded mounting stud 2 2 m/s forced air, studmounted on 3c/w aluminum chassis. vdc rated capacitance code ripple current maximum maximum l esl part number 100 hz 25c (f) d x l (mm) 100 hz 85c (a) 10 khz 50c (a) 2 10 khz 40c (a) 100 hz 20c (m) 100 khz 20c (m) approximate (nh) 350 680 d 35 x 95 3.8 21.9 16.0 120 55 12 peh200ud3680m(1) 350 680 g 50 x 49 4.0 20.7 12.6 130 66 16 peh200ug3680m(1) 350 1000 h 50 x 75 5.5 28.8 19.5 85 41 16 peh200uh4100m(1) 350 1500 j 50 x 95 6.8 32.9 23.4 57 28 16 peh200uj4150m(1) 350 2200 o 65 x 105 9.4 39.8 29.2 41 21 16 peh200uo4220m(1) 350 2200 l 75 x 78 9.8 43.5 29.4 41 21 17 peh200ul4220m(1) 350 3300 o 65 x 105 10.9 38.6 27.5 31 17 16 peh200uo4330m(1) 350 3300 m 90 x 78 13.1 54.0 37.0 28 15 16 peh200um4330m(1) 350 4700 u 75 x 115 14.5 54.7 39.5 20 11 17 peh200uu4470m(1) 350 4700 n 90 x 98 15.0 51.3 36.7 22 13 16 peh200un4470m(1) 350 6800 v 75 x 145 16.8 57.0 42.3 15 8 17 peh200uv4680m(1) 350 10000 x 75 x 220 19.4 60.8 48.5 11 7 17 peh200ux5100m(1) 350 10000 y 90 x 145 23.3 75.2 56.9 11 6 16 peh200uy5100m(1) 350 15000 z 90 x 220 27.3 79.8 64.4 8 5 16 peh200uz515am(1) 385 220 a 35 x 51 2.1 14.6 9.3 330 150 12 peh200xa3220m(1) 385 330 c 35 x 75 2.7 17.0 12.0 220 97 12 peh200xc3330m(1) 385 470 d 35 x 95 3.3 19.1 14.2 150 69 12 peh200xd3470m(1) 385 470 g 50 x 49 3.6 20.9 12.8 160 78 16 peh200xg3470m(1) 385 680 h 50 x 75 4.7 26.8 18.4 110 51 16 peh200xh3680m(1) 385 1000 j 50 x 95 5.9 31.7 22.8 76 35 16 peh200xj4100m(1) 385 1500 k 50 x 105 7.1 34.1 24.7 52 25 16 peh200xk4150m(1) 385 2200 o 65 x 105 9.6 36.7 26.1 38 20 16 peh200xo4220m(1) 385 2200 l 75 x 78 10.0 42.7 28.8 38 20 17 peh200xl4220m(1) 385 3300 t 75 x 105 12.8 52.5 37.4 25 13 17 peh200xt4330m(1) 385 3300 m 90 x 78 13.3 52.6 36.0 26 14 16 peh200xm4330m(1) 385 4700 v 75 x 145 15.2 57.6 43.9 19 11 17 peh200xv4470m(1) 385 4700 n 90 x 98 16.6 62.4 44.4 19 10 16 peh200xn4470m(1) 385 6800 y 90 x 145 20.9 74.8 57.2 14 8 16 peh200xy4680m(1) 385 6800 x 75 x 220 17.4 58.9 47.0 14 8 17 peh200xx4680m(1) 400 220 a 35 x 51 2.2 11.4 9.6 310 130 12 peh200va3220m(1) 400 330 c 35 x 75 2.8 14.3 12.6 210 90 12 peh200vc3330m(1) 400 470 d 35 x 95 3.4 16.5 14.8 140 63 12 peh200vd3470m(1) 400 470 g 50 x 49 3.7 15.0 12.7 150 73 16 peh200vg3470m(1) 400 680 h 50 x 75 4.9 21.2 18.3 110 55 16 peh200vh3680m(1) 400 1000 j 50 x 95 5.9 24.2 21.3 76 38 16 peh200vj4100m(1) 400 1500 o 65 x 105 9.1 49.1 35.1 53 27 16 peh200vo415aq(1) 400 1500 l 75 x 78 8. 8 34.0 29.0 52 27 17 peh200vl4150m(1) 400 2200 o 65 x 105 9.6 29.1 25.6 39 21 16 peh200vo4220m(1) 400 2200 m 90 x 78 11.8 44.1 37.1 36 19 16 peh200vm4220m(1) 400 3300 o 65 x 105 11.0 30.5 26.7 29 16 16 peh200vo433am(1) 400 3300 u 75 x 115 13.8 52.0 45.7 22 10 17 peh200vu433aq(1) 400 3300 n 90 x 98 14.9 52.8 45.2 25 13 16 peh200vn4330m(1) 400 3300 t 75 x 105 13.0 41.5 36.3 26 14 17 peh200vt4330m(1) 400 4700 v 75 x 145 15.6 57.0 42.5 18 10 17 peh200vv447am(1) 400 6800 x 75 x 220 17.6 51.2 47.7 13 8 17 peh200vx4680m(1) 400 6800 y 90 x 145 21.4 64.1 56.8 13 7 16 peh200vy4680m(1) 400 10000 z 90 x 220 24.7 69.2 64.0 9 5 16 peh200vz5100m(1) 420 150 a 35 x 51 1.8 12.1 7.8 400 170 12 peh200oa3150m(1) 420 220 c 35 x 75 2.3 14.3 10.3 270 110 12 peh200oc3220m(1) 420 330 d 35 x 95 2.9 16.3 12.3 180 76 12 peh200od3330m(1) 420 330 g 50 x 49 3.2 20.4 12.6 190 80 16 peh200og3330m(1) 420 470 h 50 x 75 4.2 24.8 17.0 140 62 16 peh200oh3470m(1) 420 680 j 50 x 95 5.1 28.1 20.4 96 44 16 peh200oj3680m(1) 420 1000 k 50 x 105 6.3 32.0 23.2 67 31 16 peh200ok4100m(1) 420 1500 o 65 x 105 8.8 38.9 28.4 47 23 16 peh200oo4150m(1) 420 1500 l 75 x 78 9.1 42.3 28.5 47 23 17 peh200ol4150m(1) 420 2200 t 75 x 105 11.5 51.6 37.0 32 16 17 peh200ot4220m(1) 420 2200 m 90 x 78 12.2 52.7 36.0 33 17 16 peh200om4220m(1) vdc rated capacitance size code reference size ripple current esr l esl part number screw terminal aluminum electrolytic capacitors C peh200 series, +85c
8 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 table 1 C ratings & part number reference cont'd (1) mounting code: u2 = plain can, b2 = threaded mounting stud 2 2 m/s forced air, studmounted on 3c/w aluminum chassis. vdc rated capacitance code ripple current maximum maximum l esl part number 100 hz 25c (f) d x l (mm) 100 hz 85c (a) 10 khz 50c (a) 2 10 khz 40c (a) 100 hz 20c (m) 100 khz 20c (m) approximate (nh) 420 2700 o 65 x 105 12.4 57.3 40.1 24 10 16 peh200oo427am(1) 420 3300 v 75 x 145 14.0 57.5 43.7 22 11 17 peh200ov4330m(1) 420 3300 n 90 x 98 15.4 61.9 44.0 22 12 16 peh200on4330m(1) 420 4700 x 75 x 220 15.7 57.6 46.8 16 8 17 peh200ox4470m(1) 420 4700 y 90 x 145 18.2 62.2 47.5 17 9 16 peh200oy4470m(1) 420 8200 z 90 x 220 23.8 77.3 63.1 10 5 16 peh200oz4820m(1) 450 150 a 35 x 51 2.0 14.6 9.3 350 150 12 peh200ya3150m(1) 450 220 c 35 x 75 2.5 16.8 11.9 240 99 12 peh200yc3220m(1) 450 330 d 35 x 95 3.1 19.4 14.5 160 66 12 peh200yd3330m(1) 450 330 g 50 x 49 3.5 20.8 12.7 170 75 16 peh200yg3330m(1) 450 470 h 50 x 75 4.5 25.5 17.5 120 58 16 peh200yh3470m(1) 450 680 j 50 x 95 5.5 28.8 20.8 86 41 16 peh200yj3680m(1) 450 1000 k 50 x 105 6.7 32.7 23.6 60 29 16 peh200yk4100m(1) 450 1500 o 65 x 105 9.3 39.2 28.2 43 22 16 peh200yo4150m(1) 450 1500 l 75 x 78 9.6 42.3 28.5 43 22 17 peh200yl4150m(1) 450 1800 o 65 x 105 10.6 47.8 34.0 43 22 17 peh200yo418am(1) 450 2200 t 75 x 105 12.1 50.1 35.6 29 15 17 peh200yt4220m(1) 450 2200 m 90 x 78 12.7 52.4 35.8 30 16 16 peh200ym4220m(1) 450 3300 v 75 x 145 14.7 57.3 43.7 20 10 17 peh200yv4330m(1) 450 3300 n 90 x 98 16.1 61.9 43.9 21 11 16 peh200yn4330m(1) 450 4700 x 75 x 220 16.8 59.3 47.6 14 8 17 peh200yx4470m(1) 450 4700 y 90 x 145 18.9 61.4 46.9 16 9 16 peh200yy4470m(1) 450 8200 z 90 x 220 24.9 77.7 63.4 10 5 16 peh200yz4820m(1) 500 100 a 35 x 51 1.5 6.1 3.9 1290 760 12 peh200za3100m(1) 500 150 b 35 x 60 1.9 7.5 4.9 670 390 12 peh200zb3150m(1) 500 220 c 35 x 75 2.3 8.4 5.8 570 345 12 peh200zc3220m(1) 500 220 g 50 x 49 2.5 10.1 6.1 595 365 12 peh200zg3220m(1) 500 330 d 35 x 95 2.9 10.7 7.7 390 234 12 peh200zd3330m(1) 500 470 h 50 x 75 4.2 15.8 10.5 280 165 16 peh200zh3470m(1) 500 680 j 50 x 95 5.1 18.4 12.8 195 115 16 peh200zj3680m(1) 500 1000 o 65 x 105 6.8 21.4 15.5 130 79 16 peh200zo4100m(1) 500 1500 t 75 x 105 9.2 29.8 21.0 90 57 17 peh200zt4150m(1) 500 1800 o 65 x 105 10.6 40.9 28.2 71 45 16 peh200zo418hm(1) 500 2200 v 75 x 145 11.1 33.7 25.1 62 40 17 peh200zv4220m(1) 500 3300 x 75 x 220 12.8 36.5 29.0 43 28 17 peh200zx4330m(1) 500 3300 y 90 x 145 15.7 46.9 35.4 38 24 16 peh200zy4330m(1) 500 5600 z 90 x 220 19 .6 53.4 42.6 31 21 16 peh200zz4560m(1) vdc rated capacitance size code reference size ripple current esr l esl part number screw terminal aluminum electrolytic capacitors C peh200 series, +85c
9 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 mechanical data polarity and reversed voltage aluminium electrolytic capacitors manufactured for use in dc applications contain an anode foil and a cathode foil. as such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. if this were to be reversed then the electrolytic process that took place in forming the oxide layer on the anode would be recreated in trying to form an oxide layer on the cathode. in forming the cathode foil in this way, heat would be generated and gas given off within the capacitor, usually leading to catastrophic failure. the cathode foil already possesses a thin stabilized oxide layer. this thin oxide layer is equivalent to a forming voltage of approximately 2 v. as a result, the capacitor can withstand a voltage reversal of up to 2 v for short periods. above this voltage, the formation process will commence. aluminium electrolytic capacitors can also be manufactured for use in intermittent ac applications by using two anode foils in place of one anode and one cathode. mounting position the capacitor can be mounted upright or inclined to a horizontal position. clamp fixing clips must be ordered separately . stud fixing nylon cap nut must be ordered separately . for the stud fxing insulated version, the outer insulation serves as lock washer . maximum tightening torque: m8 = 3 nm m12= 8 nm maximum chassis thickness 5 mm. screw terminals m5 x 10 according to din 41.248. maximum tightening torque = 2.5 nm. must be ordered separately . recommended maximum connector thickness with delivered screw = 4 mm. m6 thread upon request. insulating cup peh200 is supplied with a 0.8 mm thick polypropylene insulating cup. v oltage proof of the insulating cup: 4,000 vdc screw terminal aluminum electrolytic capacitors C peh200 series, +85c
10 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 marking kemet logo rated capacitance rated voltage (vdc) operating temperature part number code date of manufacture, batch number made in the european union capacitance tolerance construction detailed cross section margin safety vent screw terminal laser welded terminal tab aluminum can insulating cup deck insulating cup aluminum can laser welded terminal tabs deck screw terminal (+) screw terminal (-) polarity mark (+) safety vent plug anode aluminum foil, etched, covered with aluminum oxide (fourth layer) cathode aluminum foil, etched (second layer) paper spacer impregnated with electrolyte (first layer) paper spacer impregnated with electrolyte (third layer) screw terminal aluminum electrolytic capacitors C peh200 series, +85c
11 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 construction data the manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then formed to produce the aluminum oxide layer. both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. during the winding process, aluminum tabs are attached to each foil to provide the electrical contact. the deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. the complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. each capacitor is aged and tested before being sleeved and packed. the purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. the process may take several hours to complete. damage to the oxide layer can occur due to variety of reasons: ? slitting of the anode foil after forming ? attaching the tabs to the anode foil ? minor mechanical damage caused during winding a sample from each batch is taken by the quality department after completion of the production process. this sample size is controlled by the use of recognized sampling tables def ned in bs 6001. the following tests are applied and may be varied at the request of the customer. in this case the batch, or special procedure, will determine the course of action. electrical: ? leakage current ? capacitance ? esr ? impedance ? tan delta mechanical/visual: ? overall dimensions ? torque test of mounting stud ? print detail ? box labels ? packaging, including packed quantity screw terminal aluminum electrolytic capacitors C peh200 series, +85c forming winding decking impregnation assembly testing sleeving packing extended cathode anode foil cathode foil tissues foil tabs aging etching
12 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. screw terminal aluminum electrolytic capacitors C peh200 series, +85c
13 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a 4034_peh200 ? 3/30/2016 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. screw terminal aluminum electrolytic capacitors C peh200 series, +85c

▲Up To Search▲

Price & Availability of PEH200VZ5100MU2

	To Download PEH200VZ5100MU2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .